ABB REF 610 Technical Reference Manual page 51

1MRS 755310 Feeder Protection Relay
Technical Reference Manual
Table 4.1.4.10-5 SGF4
Switch Function
SGF4/6 Operation mode of light signal output
• When the switch is in position 1, the light signal output will be
blocked by the trip signal from stage ARC.
ΣSGF4
Table 4.1.4.10-6 SGF5
Switch Function
SGF5/1 Selection of the latching feature for programmable LED1
SGF5/2 Selection of the latching feature for programmable LED2
SGF5/3 Selection of the latching feature for programmable LED3
SGF5/4 Selection of the latching feature for programmable LED4
SGF5/5 Selection of the latching feature for programmable LED5
SGF5/6 Selection of the latching feature for programmable LED6
SGF5/7 Selection of the latching feature for programmable LED7
SGF5/8 Selection of the latching feature for programmable LED8
• When the switch is in position 0 and the signal routed to the
LED is reset, the programmable LED will be cleared.
• When the switch is in position 1, the programmable LED will
remain lit although the signal routed to the LED is reset.
A latched programmable LED can be cleared either via the
HMI, a digital input or the serial bus.
ΣSGF5
SGB1...SGB5
The DI1 signal is routed to the functions below with the switches of switchgroup
SGB1, the DI2 signal with those of SGB2, and so forth.
Table 4.1.4.10-7 SGB1...SGB5
Switch Function
SGB1...5/1 • 0 = indications are not cleared by the digital input signal
• 1 = indications are cleared by the digital input signal
SGB1...5/2 • 0 = indications are not cleared and latched output contacts are
not unlatched by the digital input signal
• 1 = indications are cleared and latched output contacts are
unlatched by the digital input signal
SGB1...5/3 • 0 = indications and memorized values are not cleared and
latched output contacts are not unlatched by the digital input
signal
• 1 = indications and memorized values are cleared and latched
output contacts are unlatched by the digital input signal
REF 610
Default
setting
0
0
Default
setting
0
0
0
0
0
0
0
0
0
Default
setting
0
0
0
51