Preparation; Name Of Each Part Of The Projector - Sanyo PLC-XF20 Owner's Manual

PREPARATION

NAME OF EACH PART OF THE PROJECTOR

FRONT OF THE CABINET
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS COVER
BACK OF THE CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector, the
following precautions should be taken.
Do not put a flammable object near this vent.
Keep the rear grills at least 3' (1m) away
from any object, especially heat-sensitive
object.
Do not touch this area, especially screws
and metallic parts. This area will become
hot while the projector is used.
This projector detects the internal
temperature and automatically controls the
operating power of the Cooling Fans.
BOTTOM OF THE CABINET
AIR INTAKE VENTS
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover the vent slots.
Keep bottom clear of any objects.
Obstructions may block cooling air.
SPEAKERS
LEVEL AND TILT ADJUST HANDLE
INFRARED
REMOTE RECEIVER
AIR FILTER
POWER CORD
CONNECTOR
CARRYING HANDLE
ADJUSTABLE FEET
ADJUSTABLE FEET
MAIN ON / OFF
SWITCH
LAMP COVER
7