Menu Bar - Sanyo PLC-XF20 Owner's Manual

MENU BAR IN COMPUTER MODE
WHEN SELECT THE DVI TERMINAL
INPUT MENU IMAGE MENU
Used to adjust the
Used to select
computer image.
the Input
[Fine sync / Total dots /
source. (Refer
White Balance / Contrast /
to P26)
Brightness / Sharpness/
Gamma/Progressive]
(Refer to P32)
INPUT SOURCE MENU
Used to select a
computer signal type
(Digital or Analog).
Refer to P27
WHEN SELECT THE 5 BNC TERMINAL AND RGB INPUT SELECT
2
RGB
INPUT SOURCE MENU
Used to select a input source
type. (RGB or Y, Pb/Cb, Pr/Cr)
(Refer to P27)
WHEN SELECT THE HDB 15-PIN TERMINAL
4

MENU BAR

PC ADJUST MENU
Used to adjust the
parameters to
match with the input
signal format.
(Refer to P30, 31)
D-XGA
POSITION MENU
SYSTEM MENU
Used to adjust the
Used to select a
position of the
computer system.
image.
(Refer to P28)
(Refer to P33)
XGA 1
XGA 1
BEFORE OPERATION
SETTING MENU
Used to set the Display
Menu, other functions
setting and reset Lamp
Replacement Monitor
Timer. (Refer to P39-41)
SOUND MENU
SCREEN MENU
Used to adjust the
Used to adjust the
size of the image or sound [Volume,
to correct the
Bass or Treble], to
Keystone distortion. select Built-in SP
(Refer to P34)
On-Off and Sound
Mute.
(Refer to P26)
LANGUAGE MENU
Used to select
the language
used in the
Menu.
(Refer to P41)
21