Normal Function; Picture Screen Adjustment - Sanyo PLC-XF20 Owner's Manual

VIDEO MODE
The normal picture level is preset on this projector at the
factory and can be restored anytime you press the NORMAL
button (located on the Side Control or on the Remote Control
Unit). The "Standard" display will be displayed on the screen
for a few seconds.
This projector has a picture screen resize function, which enables you to display the desirable image size.
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN and press the SELECT button. Another dialog box
PICTURE SCREEN ADJUSTMENT DISPLAY will appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the screen size that you want to set,
and then press the SELECT button.
Regular
Normal Video Image size with 4 x 3 aspect ratio.
Wide
Resizes the image for wide screen size with 16 x 9 aspect ratio.
Keystone
When the image is distorted vertically, select Keystone in the dialog
box. Correct the Keystone distortion by pressing KEYSTONE
button or POINT UP/DOWN button(s). Refer to KEYSTONE
ADJUSTMENT on page 24.
38

NORMAL FUNCTION

PICTURE SCREEN ADJUSTMENT

Standard
Move the pointer to the function and
press the SELECT button.
NOTE : The Regular and the Wide cannot be
operated when "720p", "1035i", "1080i-50"
or "1080i-60" is selected on the SYSTEM
/
MENU (P36).