Sanyo PLC-XF20 Owner's Manual page 22

BEFORE OPERATION
MENU BAR IN VIDEO MODE
WHEN SELECT THE AV TERMINAL
INPUT MENU
Used to select
the Input
source. (Refer
to P26)
3
INPUT SOURCE MENU
Used to select a video
source among [
Y/C and S-Video
(Refer to P35)
WHEN SELECT THE 5 BNC TERMINAL AND Y, Pb/Cb, Pr/Cr INPUT SELECT
INPUT SOURCE MENU
Used to select a input source
type. (RGB or Y, Pb/Cb, Pr/Cr)
(Refer to P35)
22
IMAGE MENU
Used to adjust the picture image.
[Color / Tint / White Balance / Contrast
/ Brightness/ Sharpness/Gamma /
Noise Reduction / Progressive]
(Refer to P37)
SYSTEM MENU
Used to select a
color system of the
Video,
. selected video
source.
(Refer to P36)
SYSTEM MENU
Used to select a
component video
signal format.
(Refer to P36)
SETTING MENU
Used to set the Display
Menu, other functions
setting and reset Lamp
Replacement Monitor
Timer. (Refer to P39-41)
SCREEN MENU
Used to set the size
of the image either
Regular or Wide,
or to correct the
Keystone distortion.
(Refer to P38)
LANGUAGE MENU
Used to select
the language
used in the
Menu.
(Refer to P41)
SOUND MENU
Used to adjust the
sound [Volume,
Bass or Treble], to
select Built-in SP
On-Off and Sound
Mute.
(Refer to P26)