Preparation; Name Of Each Part Of The Projector - Sanyo PLC-XU20E Owner's Manual

PREPARATION

NAME OF EACH PART OF THE PROJECTOR

FRONT OF THE CABINET
PROJECTION LENS
LENS COVER
INFRARED REMOTE RECEIVER
BACK OF THE CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector,
following attention should be taken.
Do not put a flammable object near this
part.
Keep heat-sensitive objects away from the
exhaust vent.
Do not touch this part especially screws
and metallic parts. This part will become
hot while the projector is used.
POWER CORD CONNECTOR
BOTTOM OF THE CABINET
AIR INTAKE VENTS
These Air Intake Vents
should not be blocked.
LAMP COVER
6
CARRY HANDLE
SPEAKER (Monaural)
INFRARED
REMOTE RECEIVER
ADJUSTABLE FEET
FEET LOCK LATCHES
AND