No Show Function; Picture Freeze Function; P-Timer Function; Sound Adjustment - Sanyo PLC-XF20 Owner's Manual

Press the NO SHOW button on the Remote Control Unit to
black out the image. This function is cancelled when the NO
SHOW button is pressed again or any other function button is
pressed.
Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. This function is
cancelled when the FREEZE button is pressed again or any other function button is pressed.
Press the P-TIMER button on the Remote Control unit. The
timer display "00 : 00" appears on the screen and the timer
starts to count the time (00 : 00 ~ 59 : 59).
To stop the P-TIMER, press the P-TIMER button. And then,
press the P-TIMER button again to cancel the P-TIMER
function.

DIRECT OPERATION

Sound Volume Adjustment
Press the VOLUME (+/–) button(s) on the Side Control or on the
Remote Control Unit to adjust the volume. The Volume dialog box
appears on the screen for a few seconds.
(+) button to increase the volume, and (–) button decreasing.
Sound Mute Setting
Press the MUTE button on the Remote Control Unit to cut off the
sound. To restore the sound to its previous level, press the MUTE
button again or press Volume (+/–) button(s).

NO SHOW FUNCTION

PICTURE FREEZE FUNCTION

P-TIMER FUNCTION

SOUND ADJUSTMENT

BASIC OPERATION
No show
The message disappears after 4 seconds.
Indicates the roughly level
of the volume.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.
25