Preparation; Name Of Each Part Of Projector - Sanyo LC-X1000 Owner's Instruction Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS CAP
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing a projector, following
precautions should be taken.
Do not put a flammable object near this vent.
Keep rear grills at least 3'(1 m) away from
any object, especially heat-sensitive object.
Do not touch this area, especially screws
and metallic parts. This area will become
hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.
BOTTOM OF CABINET
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
TOP CONTROLS
AND INDICATORS
SPEAKERS
POWER CORD
CONNECTOR
LAMP COVER
ADJUSTABLE FEET
FEET LOCK LATCHES
TERMINALS
AND CONNECTORS
AIR INTAKE VENTS
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover vent slots.
AND
Keep side clear of any objects.
Obstructions may block cooling air.
AIR INTAKE
VENT
INFRARED
REMOTE RECEIVER
CARRYING
HANDLE
7