Computer Mode; Selecting Computer System - Sanyo PLC-XF20 Owner's Manual

COMPUTER MODE

When connecting to the computer, select a computer signal type
(Digital or Analog) in INPUT SOURCE Menu.
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the INPUT source that you want to
select, and then press the SELECT button.
When connecting to those equipment, select the type of Input
source in INPUT SOURCE Menu.
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button. Another dialog box
INPUT SOURCE Menu will appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to "RGB", and then press the SELECT
button.
RGB
When connect the computer output [5 BNC Type (Red, Green,
Blue, Horiz. Sync and Vert. Sync.)] from the computer to the
R/Pr, G/Y, B/Pb, H/HV and V jacks.

SELECTING COMPUTER SYSTEM

WHEN SELECT THE INPUT 1 (DVI SLOT )
WHEN SELECT THE INPUT 2 (5 BNC SLOT )
D-XGA
XGA 1
RGB
27