Menu Operation; Selecting Input Source; Direct Operation - Sanyo PLC-XF20 Owner's Manual

BASIC OPERATION

MENU OPERATION

1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
SOUND and press the SELECT button. Another dialog box
SOUND ADJUST Menu will appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to select by
pressing the POINT UP/DOWN buttons.
Volume
Move the arrow to or
DOWN buttons. To increase the volume, point the arrow to
then press the SELECT button. To decrease the volume point the
arrow to and then press the SELECT button.
Treble
To adjust the Treble sound, point the arrow to
then press the SELECT button.
Bass
To adjust the Bass sound, point the arrow to
then press the SELECT button.
Built-in SP.
To disconnect the built-in speaker, point the arrow to Built-in SP. and
then press the SELECT button. The Built-in SP. display is changed Off
from On and Internal speaker is disconnected.
Mute
To cut off the audio sound, point the arrow to "Mute" and then press
the SELECT button. The Mute display is changed On from Off and
the sound is cut off. To restore the sound to its previous volume level,
set the Mute to Off.

DIRECT OPERATION

Select INPUT source by pressing the INPUT 1/2 and INPUT
3/4 button on the side Control or on the Remote Control Unit.
MENU OPERATION
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select Input
and press the SELECT button. Another dialog box INPUT
SELECT Menu will appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the INPUT source that you want to
select, and then press the SELECT button.
26
of "Volume" by pressing the POINT UP/
or of "Treble" and
or of "Bass" and

SELECTING INPUT SOURCE

and
Close the Sound Menu.
INPUT 1/2 button
INPUT 1
INPUT 2
Indicate the roughly
level of the item.
Move the arrow to
or
and press the
SELECT button.
Move the arrow to
the item and then
press the SELECT
button.
INPUT 3/4 button
INPUT 3
INPUT 4
D-XGA