1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. XC50 - PLC XGA LCD Projector
  6. Owner's manual

Sanyo XC50 - PLC XGA LCD Projector Owner's Manual

Instruction manual, plc-xc50a
Hide thumbs Also See for XC50 - PLC XGA LCD Projector:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Manual
Multimedia Projector
PLC-XC50A
MODEL
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Sanyo XC50 - PLC XGA LCD Projector

Summary of Contents for Sanyo XC50 - PLC XGA LCD Projector

  • Page 1 Multimedia Projector PLC-XC50A MODEL Owner’s Manual...

  • Page 2: Features And Design

    Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ ♦...

  • Page 3: Table Of Contents

    Table of Contents Features and Design . . . . . . . . . . . . . . . . . . . Computer System Selection Auto PC Adjustment Table of Contents .

  • Page 4: To The Owner

    To the Owner Before installing and operating this projector, read this Safety Precaution manual thoroughly. This projector provides many convenient features and ● wARNING: THIS APPARATUS MUST BE EARTHED . functions. Operating the projector properly enables ● TO REDUCE THE RISK OF FIRE OR you to manage those features and maintains it in good ELECTRIC SHOCK, DO NOT EXPOSE THIS condition for many years to come.

  • Page 5: Safety Instructions

    Safety Instructions All the safety and operating instructions should be read Do not install the projector near the ventilation duct of before the product is operated. air-conditioning equipment. Read all of the instructions given here and retain them This projector should be operated only from the type for later use.

  • Page 6: Air Circulation

    Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. To Do not point the projector up to project an ensure reliable operation of the product and to protect it image. from overheating, these openings must not be blocked or covered.

  • Page 7: Compliance

    Model Number : PLC-XC50A Trade Name : Sanyo Responsible party : SANYO NORTH AMERICA CORPORATION Address : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818)998-7322 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

  • Page 8: Part Names And Functions

    Part Names and Functions ① Air Intake Vent Front ② Power Cord Connector ③ Infrared Remote Receiver ④ Focus Ring (front) ⑤ Lens and Lens cover ⑥ Zoom Ring (rear) ⑦ Slide Shutter ① ② ③ ④ ⑤ ⑥ ⑦ ⑧...

  • Page 9: Rear Terminal

    Part Names and Functions Rear Terminal ① ② ③ ④ ⑤ ⑨ ⑧ ⑦ ⑥ ① CONTROL PORT ⑥ COMPUTER1 COMPONENT/ COMPUTER When the projector is controlled by a computer, AUDIO IN connect to this jack with serial control cable. Connect the audio output (stereo) from a computer or video equipment connected to ②...

  • Page 10: Top Control

    Part Names and Functions Top Control ① ② ③ ④ ⑤ ⑧ ⑥ ⑪ ⑩ ⑨ ⑦ ① POwER indicator ⑤ POINT ▲▼ buttons – Lights red when the projector is in stand-by mode. – Select an item or adjust the value in the –...

  • Page 11: Remote Control

    Part Names and Functions Remote Control ① ON/STAND-By button Turn the projector on or off. (pp.18, 20) ② AUTO SET button Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu. (pp.23, 45) ③...

  • Page 12: Remote Control Battery Installation

    Part Names and Functions Remote Control Battery Installation Open the battery Install new batteries Replace the compartment lid. into the compartment. compartment lid. Two AAA size batteries For correct polarity (+ and –), be sure battery terminals are in contact with pins in compartment.

  • Page 13: Installation

    Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

  • Page 14: Connecting To A Computer

    Installation Connecting to a Computer Cables used for connection • VGA Cable (Mini D-sub 15 pin) * • DVI-VGA Cable or DVI Cable • Audio Cables (*One cable is supplied; other cables are not supplied with the projector.) Audio Output Monitor Output Monitor Input Monitor Output...

  • Page 15: Connecting To Video Equipment

    Installation Connecting to Video Equipment Cables used for connection • Video and Audio Cable (RCA x 3) • S-Video Cable • Audio Cable (Cables are not supplied with the projector. ) Video and Audio Output S-Video Output (R) (L) (Video) External Audio Equipment S-Video cable Video and audio cable...

  • Page 16: Connecting To Component Video Equipment

    Installation Connecting to Component Video Equipment Cables used for connection • Audio Cables • Scart-VGA Cable • VGA Cable • Component Cable • Component-VGA Cable (Cables are not supplied with this projector.) External Audio Equipment RGB Scart 21- Component Video Output pin Output Audio Output Audio Input...

  • Page 17: Connecting The Ac Power Cord

    Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

  • Page 18: Basic Operation

    Basic Operation Turning On the Projector Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red. Press the ON/STAND-BY button on the top control or on the remote control.
  • Page 19 Basic Operation Enter a PIN code Use the Point buttons to enter a number. Press the ▲▼ PIN Code Input Dialog Box Point button to fix the number and move the red frame ► pointer to the next box. The number changes to “”. If you fixed an incorrect number, use the Point button to move ◄...

  • Page 20: Turning Off The Projector

    Basic Operation Turning Off the Projector Press the ON/STAND-BY button on the top control or on the remote control, and Power off? appears on the screen. Press the ON/STAND-BY button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running.

  • Page 21: How To Operate The On-Screen Menu

    Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Top Control Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.

  • Page 22: Menu Bar

    Basic Operation Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 70-71. Main Menu Sub-Menu ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ XGA1 ⑨ Input ① Used to select an input source from Computer 1, Computer  ,Video or S-video. (pp.27-28,37-38).

  • Page 23: Zoom And Focus Adjustment

    Basic Operation Zoom and Focus Adjustment Open the slide shutter. Focus Ring Zoom Ring Slide Shutter (Front) (Rear) Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the projected picture focus. Close the slide shutter. Note: Close the slide shutter of lens operation part to keep out dust just after zoom and focus adjustments.

  • Page 24: Sound Adjustment

    Basic Operation Sound Adjustment Top Control Direct Operation VOLUME+/- buttons Volume Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Remote Control Mute Press the MUTE button on the remote control to select On...

  • Page 25: Remote Control Operation

    Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Remote Control COMPUTER 1/, VIDEO, S-VIDEO and COMPONENT buttons COMPUTER 1/ buttons Press the COMPUTER 1/2, VIDEO, S-VIDEO and...
  • Page 26 Basic Operation NO SHOw button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The screen changes each time you press the NO SHOW button as follows. No show disappears after 4 seconds.

  • Page 27: Computer Input

    Computer Input Input Source Selection (RGB: Computer 1/Computer (Analog)) Direct Operation Choose either Computer 1(RGB) or Computer 1(Scart) or Computer (Analog) by pressing the INPUT button on the top control or press the COMPUTER 1 button or Computer 2 on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below.

  • Page 28: Input Source Selection (Rgb(Pc Digital), Rgb(Av Hdcp))

    Computer Input Input Source Selection (RGB(PC digital), RGB(AV HDCP)) Direct Operation Choose Computer  (PC digital) or Computer  (AV HDCP) by pressing the INPUT button on the top control or press the COMPUTER 2 button on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below.

  • Page 29: Computer System Selection

    Computer Input Computer System Selection This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 74-75.) One of the following messages may appear when: The projector cannot recognize the connected...

  • Page 30: Auto Pc Adjustment

    Computer Input Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync ., Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V positions to conform to your computer. Menu Operation PC adjust Menu Auto PC adj .

  • Page 31: Manual Pc Adjustment

    Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
  • Page 32 Computer Input Reset To reset the adjusted data, select Reset and press the Mode free SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures. Mode free To clear the stored data, select Mode free and then press the Point or the SELECT button.

  • Page 33: Image Mode Selection

    Computer Input Image Mode Selection Remote Control Direct Operation IMAGE button Select the desired image mode among Dynamic, Standard, Dynamic Real, Blackboard (Green), Colorboard, Image 1, Image , Image  and Image 4 by pressing the IMAGE button on the Standard remote control.

  • Page 34: Image Adjustment

    Computer Input Image Adjustment Press the MENU button to display the On-Screen Image Adjust Menu Menu. Use the Point buttons to select Image ▲▼ adjust and then press the Point or the SELECT ► button. Use the Point buttons select the desired item ▲▼...

  • Page 35: Screen Size Adjustment

    Computer Input Store To store the adjusted data, select Store and press the Point ►or the SELECT button. Use the Point buttons to ▲▼ select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1–4) in the Image Mode Selection on page 33.
  • Page 36 Computer Input Custom Adjust the screen scale and position manually with this function. Press the Point button at Custom and the Custom is ► displayed on the screen, you can use the Point buttons ▲▼ to choose the item you want to adjust. Scale H/V ..

  • Page 37: Video Input

    Video Input Input Source Selection (Video, S-video) Direct Operation Top Control Computer 1 ( RGB) Choose Video or S-video by pressing the INPUT button on /(Component) / (Scart) the top control or the VIDEO button or the S-VIDEO button on the remote control. Computer  (PC digital) / INPUT button (AV HDCP) /...

  • Page 38: Input Source Selection

    Video Input Input Source Selection (Component, RGB Scart 1-pin) Direct Operation Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or press the COMPONENT button or the COMPUTER 1 on the remote control. Before using INPUT button, correct input source should be selected through Menu operation as described below.

  • Page 39: Video System Selection

    Video Input Video System Selection AV System Menu (Video or S-video) Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Input and ▲▼ then press the Point or the SELECT buttons. ► RGB(PC digital) Use the Point buttons to select Video or S-video ▲▼...

  • Page 40: Image Mode Selection

    Video Input Image Mode Selection IMAGE button Direct Operation Remote Control Dynamic Select the desired image mode among Dynamic, Standard, Cinema, Blackboard (Green), Colorboard, Image 1, Standard Image , Image  and Image 4 by pressing the IMAGE button on the remote control. Cinema Menu Operation Blackboard (Green)

  • Page 41: Image Adjustment

    Video Input Image Adjustment Press the MENU button to display the On-Screen Image Adjust Menu Menu. Use the Point buttons to select Image ▲▼ adjust and then press the Point or the ► SELECT button. Use the Point buttons select the desired item ▲▼...
  • Page 42 Video Input Sharpness Press the Point button to decrease the sharpness of the ◄ image; press the Point button to increase the sharpness ► of the image (from 0 to 15). Gamma Use the Point buttons to adjust the gamma value to ◄►...

  • Page 43: Screen Size Adjustment

    Video Input Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Screen and ▲▼...

  • Page 44: Setting

    Setting Setting This projector has a Setting menu that allows you to set up Setting Menu the other various functions described below. Press the MENU button to display the On-Screen Menu. Press the Point buttons to select Setting ▲▼ and press the Point or the SELECT button to access ►...

  • Page 45: Auto Setup

    Setting Auto setup Auto setup This function enables Input search, Auto Keystone correction and Auto PC adjustment by pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Settings for those functions can be altered as follows: Input search This function detects the input signal automatically.
  • Page 46 Setting Keystone This function is used to store or reset the keystone Keystone correction when the AC power cord is unplugged. Store ..Keep the keystone correction even when the AC power cord is unplugged. Reset ..Release the keystone correction when the AC power cord is unplugged.
  • Page 47 Setting Logo Logo select Logo (Logo and Logo PIN code lock settings) This function allows you to customize the screen logo with Logo select, capture, Logo PIN code lock and Logo PIN code change functions. Note: Closed caption When On is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected.
  • Page 48 Setting Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select yes to capture the projected image.
  • Page 49 Setting Enter a Logo PIN code Enter a Logo PIN code Use the Point buttons to enter a number. Press the ▲▼ Point button to fix the number and move the red frame ► pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point button to ◄...
  • Page 50 Setting Ceiling Ceiling When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear Rear When this function is set to On, the picture will be left/right reversed.
  • Page 51 Setting Power management Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Time left before Lamp is off. Select one of the following options: Ready ....
  • Page 52 Setting Lamp control Lamp control This function allows you to change brightness of the screen. Normal ..Normal brightness Eco .... Lower brightness reduces the lamp power consumption and extends the lamp life. Lamp life control Lamp life control Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use.
  • Page 53 Setting Filter control Filter control You can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. To replace, press the SELECT button at “YES” and the electrically operated filter starts to scroll. ...
  • Page 54 Setting Key lock Security Security (Key lock and PIN code lock) This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation. Key lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons.
  • Page 55 Setting Enter a PIN code Enter a PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ► button to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄...

  • Page 56: Filter Counter

    Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20). L1 ..Normal operation L ..Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Lamp counter Fig .1 Lamp replacement icon This function is used to display the cumulative lamp...
  • Page 57 Setting warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.

  • Page 58: Information

    Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Remote Control Press the INFO. button on the remote control to display the Information Menu.

  • Page 59: Maintenance And Cleaning

    Maintenance and Cleaning wARNING TEMP . indicator The WARNING TEMP. indicator shows the state of the function which protects the projector. Check the state of the WARNING TEMP. indicator and the POWER indicator to take proper maintenance. The projector is shut down and the wARNING TEMP . Top Control indicator is blinking red .

  • Page 60: Filter Instructions

    Maintenance and Cleaning Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to replace the filter easily.

  • Page 61: Replacing The Filter Cartridge

    Maintenance and Cleaning Replacing the Filter Cartridge Turn off the projector, and unplug the AC power cord from the AC outlet. Filter cover First, clean up the dust on the projector and around the air vents. Loosen 2 screws of the filter cover with a screwdriver and open the filter cover.

  • Page 62: Resetting The Filter Counter

    Maintenance and Cleaning Resetting the Filter Counter Be sure to reset the Filter counter after replacing the filter Filter counter cartridge. Press the MENU button to display the On-Screen Menu. Use the Point buttons to select the Setting ▲▼ and then press the Point buttons.

  • Page 63: Cleaning The Lens Cover

    Maintenance and Cleaning Cleaning the Lens Cover Unplug the AC power cord before cleaning. Gently wipe the lens cover with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens cover.

  • Page 64: Lamp Replacement

    Maintenance and Cleaning Lamp Replacement When the projection lamp of the projector reaches its end of Top Control life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with LAMP REPLACE a new one promptly. The timing when the LAMP REPLACE indicator indicator should light is depending on the lamp mode.

  • Page 65: Resetting The Lamp Counter

    Maintenance and Cleaning Resetting the Lamp Counter Be sure to reset the Lamp replacement counter after the Lamp counter lamp is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting. Press the MENU button to display the On-Screen Menu.

  • Page 66: Appendix

    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages 14-16. – Make sure all equipment is connected to AC outlet and the power is turned on. –...
  • Page 67 Appendix No image – Check the connection between your computer or video equipment and the projector. See pages 14-16. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector.
  • Page 68 Appendix The image is distorted or runs off . – Check PC adjust menu or Screen menu and adjust them. See pages 31-32, 35-36. PIN code dialog box appears – PIN code lock is being set. Enter a PIN code (the “1234” or numbers at start-up .
  • Page 69 Appendix wARNING : High voltages are used to operate this projector . Do not attempt to open the cabinet . If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

  • Page 70: Menu Tree

    Appendix Menu Tree Input: Computer / Video Input Computer 1 Component RGB (Scart) Computer 2 RGB (PC digital) RGB(AV HDCP) RGB (Analog) Video S-Video Sound Sound Volume 0–63 Mute On/Off Computer Input System SVGA 1 Image select Dynamic Mode 1 Standard Mode 2 Real...
  • Page 71 Appendix Setting Video Input System Setting Auto Language 18 languages provided. 1080i Menu position 1035i Auto setup Input search Off/On1/On2 720p Auto PC adj. 575p On/Off 480p Auto keystone 575i Auto 480i Manual System Auto Keystone Store/Reset SECAM Background Blue/User/Black NTSC Display Off /On/Countdown off...

  • Page 72: Indicators And Projector Condition

    Appendix Indicators and Projector Condition Check the indicators for projector condition. The projector is operating normally . Indicators Projector Condition WARNING WARNING LAMP POWER TEMP. FILTER REPLACE red/green orange yellow The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode.
  • Page 73 Appendix Indicators Projector Condition WARNING WARNING LAMP POWER FILTER REPLACE TEMP. red/green orange yellow The projector has been cooled down enough and the temperature returns to normal. When turning on the   projector, the WARNING TEMP. indicator stops blinking. Check and replace the filter.

  • Page 74: Compatible Computer Specifications

    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN H-Freq . V-Freq .
  • Page 75 Appendix When the input signal is digital from DVI terminal, refer to the chart below. ON-SCREEN H-Freq . V-Freq . ON-SCREEN H-Freq . V-Freq . RESOLUTION RESOLUTION DISPLAy (KHz) (Hz) DISPLAy (KHz) (Hz) D-VGA 640 x 480 31.47 59.94 D-SXGA1 1280 x 1024 63.98 60.02...

  • Page 76: Technical Specifications

    Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 16.1" x 3.3" x 10.3" (410 mm x 85 mm x 262.8 mm) (Not including protrusions) Net Weight 9.0 lbs (4.1 kg) Feet �djustment 0˚ to 10˚ Panel Resolution LCD Panel System 0.63"...

  • Page 77: Optional Parts

    Appendix Accessories Owner’s Manual (CD-ROM) Quick Reference Guide & Safety Manual AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are ●...

  • Page 78: Configurations Of Terminals

    Appendix Configurations of Terminals COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) Red (R/Cr) Input/Output +5V Power/----- Green (G/Y) Input/Output Ground (Vert.sync.) Blue (B/Cb) Input/Output Ground/----- DDC Data /----- ----- Ground (Horiz.sync.) Horiz. sync. Input/Output (Composite H/V sync.) Ground (Red) Vert.

  • Page 79: Pin Code Number Memo

    Appendix PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No . Factory default set No: 1 2 3 4* Logo PIN Code Lock No .

  • Page 80: Dimensions

    Appendix Dimensions Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) 2.81(71.5) 16.14 5.91(150.2) 4.04(102.7) 4.38(111.2) (102.0) (50.8) (230.0) (50.0)
  • Page 81 KK7AE...

This manual is also suitable for:

Plc-xc50a

Table of Contents