Adjusting The Image; Zoom Adjustment; Focus Adjustment; Lens Shift Adjustment - Sanyo PLC-XF20 Owner's Manual

BASIC OPERATION
Press the ZOOM
1
Remote Control Unit. The message "Zoom" is displayed.
Press the ZOOM
2
the ZOOM button to make the image smaller.
Press the FOCUS
1
Remote Control Unit. The message "Focus" is displayed.
Adjust the focus of the image by pressing the FOCUS
2
button(s).
1 Press the LENS SHIFT button on the Side Control or on the
Remote Control Unit. The message "Lens shift" is displayed.
Press the POINT UP button to move the image up, press the
2
POINT DOWN button to move the image down, press the POINT
LEFT to move the image left and press the POINT RIGHT to
move the image right.
If the picture has keystone distortion, correct image with KEYSTONE adjustment.
Press the KEYSTONE
1
or select the Keystone on the SCREEN menu. (Refer to page
34, 38.) The message "Keystone" is displayed.
2 Correct the Keystone distortion by pressing the KEYSTONE
/ button or the POINT UP/DOWN button(s). Press the
KEYSTONE
upper part or the image, and press the KEYSTONE
the POINT DOWN button to reduce the lower part.
Reduce the upper width with the KEY STONE
button or the POINT UP button.
24

ADJUSTING THE IMAGE

ZOOM ADJUSTMENT

/ button(s) on the Side Control or on the
button to make the image larger, and press

FOCUS ADJUSTMENT

/ button(s) on the Side Control or on the

LENS SHIFT ADJUSTMENT

KEYSTONE ADJUSTMENT

/ button on the Remote Control Unit
button or the POINT UP button to reduce the
Zoom
The message disappears after 4 seconds.
/
Focus
The message disappears after 4 seconds.
Lens shift
The message disappears after 4 seconds.
Keystone
button or
The message disappears after 4 seconds.
Reduce the lower width with the KEY STONE
button or the POINT DOWN button.