Preparation For Using The Moderator Function - Sanyo PLC-WXU30 Owner's Manual

Chapter 8 Network capture functions

Preparation for using the moderator function

First, follow the procedure in "2. Setup Procedure"
is set as written below.
•Network Capture 4 is installed on the moderator's computer and each client's computer and each
computer image can be projected.
Following application window appears when the Network Capture starts. After clicking Moderator reg-
istration button, the application window changes to "Moderator mode" window as shown in the lower
picture below.
Normal mode application window
Projector list
Moderator
registration
Moderator mode application window
Projector list
104
Status of use
Join moderator's
group
Status of
User
use
Delete moderator's registration
"Step 1–3" (p.16) and confirm that the setting status
Parameter
setting
Client list
Start real time
capture
Terminate capture
One-shot