Lens Installation; Positioning The Projector; Lens Shift Adjustment - Sanyo PLC-XF20 Owner's Manual

Sanyo owner's manual multimedia projector plc-xf20

Hide thumbs Also See for PLC-XF20:

Specifications (1 page)

Instruction manual (52 pages)

Service manual (88 pages)

Table Of Contents

Table of Contents

Before setting up the projector, install the Projection Lens on the Projector.

1. Before installation, check where the projector is used and prepare suitable lens. For specifications of the

Projection Lens, refer to the manual separately attached or contact the sales dealer where you purchased the

projector.

2. For installation, refer to the installation manual supplied to the Projector.

When moving or setting up the projector, be sure to replace the Lens Cover to protect the surface.

And be careful not to hold or subject the lens to strong forces. It may damage the lens, cabinet, or

mechanical parts.

This projector is designed to project on a flat projection

surface.

ROOM LIGHT

The brightness in the room has a great influence on

the picture quality. It is recommended to limit

ambient lighting in order to provide the best image.

VENTILATION

This projector is equipped with cooling fan to protect it from

overheating. Pay attention to the following to ensure proper

ventilation and avoid a possible risk of fire and malfunction.

Do not cover the vents with papers or other materials.

Keep the rear grill at least 3 feet (1 m) away from any

object.

Make sure that there are no objects under the

projector. An object under the projector may prevent

the projector from taking the cooling air through the

bottom vent.

The projection lens can be moved up, down, left and right with the motor-driven lens shift function. This function

makes it easy to provide the projected image where you want.

Use the LENS SHIFT button and

the POINT UP/DOWN button to

move the image up or down.

MOVED UP OR DOWN