Chapter 6 Sweep - Hantek HDG3000BC Series User Manual

Chapter 6 Sweep

In sweep mode, the instrument outputs the waveform that changes from the start frequency to the
stop frequency at a specified sweep rate.HDG3000B(C) supports linear sweep mode.
Users can configure the instrument to output one sweep from start frequency to stop frequency by
applying an external or manual trigger. The instrument can sweep sine, square, pulse, ramp,
Harmonic or arbitrary waveforms (expect DC).
 Select Sweep
 Start Frequency and Stop Frequency
 Center Frequency and Frequency Span
 Linear Sweep
 Sweep Time
 Return Time
 Hold Time
 Mark Frequency
 Sweep Trigger Source
 Trigger Output Edge
User Manual 55