Hantek HDG3000BC Series User Manual page 72

New File
In Store interface, rotate the knob to select home disk or usb disk, and then press New softkey to
enter the filename editing interface, as shown in the figure below.
Filename Input Area
1. Press Type softkey to select "File".
File: Create a new state file.
Directory: Create a new directory.
2. Press Switch Focus softkey and select Name or Keypad.
Name: Put the cursor in the Filename Input Area. Use direction keys to move the cursor
position and specify the location of the modified character.
Keypad: Put the cursor in the Virtual Keyboard. Rotate the knob to move the cursor position
and press down the knob to input the character. In the virtual keyboard, rotate the knob to
select Capsand press down to switch between uppercase and lowercase; rotate the knob to
select Shift and press down to switch some symbols.
3. Press Backspace softkey to remove the characters in front of the cursor one by one.
4. Press Delete softkey to delete all the characters in the Filename Input Area.
5. After entering the file name in the Filename Input Area, press Save softkey to save the state
file.
6. PressReturn softkey to exit the New menu and return to the previous menu.
Save
Press Save softkey to automatically create a new state file and save it.
Recall
Press Recall softkey to recall the state file or arbitrary waveform file.
User Manual 67
Virtual Soft Keyboard