Table of Contents
Advertisement
Protouch2 GUI User Manual
7 Disable Power Management
Power Management should be disabled for the hub after plugging in the hub and
before launching the tool. If it is a 3.0 Hub, then power management should be
disabled on both 2.0 Hub and 3.0 Hub. Power Management can be disabled by
using the Device Manager as shown below. Please refer to Appendix II for more
details
Uncheck the Checkbox so that the computer will not put the hub to sleep.
MICROCHIP CONFIDENTIAL
Page 7
Advertisement
Table of Contents
Need help?
Do you have a question about the Protouch2 and is the answer not in the manual?
Questions and answers