Table of Contents
Advertisement
Protouch2 GUI User Manual
3 Drivers
WinUSB driver needs to be installed before launching the tool. Hub Class Filter
installation can be done by using Command Line Tool. Please refer to "Protouch2
CLI User Manual.pdf" Section 3 for driver installation driver uninstallation.
Please run the following command in Command line using PT2_CLI as administrator
for installing the drivers
>>Pt2main.exe /iw
Note: VSM Filter driver needs to be installed if the internal HCE device is disabled.
4 Logging
Log file with detailed messages will get created in the same path from where the
application is running in the name of "PT2.log".
5 Version
The version number of the tool can be found from the help page. Refer to Section 9.1
for more details.
6 Known Limitations
Please refer to the release notes "Protouch2 release notes.pdf" for more information
on OS Supported, SKUs supported, USB controllers supported and known limitations
MICROCHIP CONFIDENTIAL
Page 6
Advertisement
Table of Contents
Need help?
Do you have a question about the Protouch2 and is the answer not in the manual?
Questions and answers