Reading An Emergency Image Plate - AGFA CR 35-X User Manual

CR 35-X D
IGITIZER

Reading an emergency image plate

You may have an image plate which you wish to give priority over other image
plates which are being processed by the image processing station. Such image
plates are referred to as 'emergency image plates'. The actual workflow
depends on the configuration of your system.
Reading an emergency image plate in the
interchangeable configuration
In the interchangeable configuration, you can treat either:
 emergency image plates with ID data via the Emergency key on the
keypad;
 emergency image plates without ID data via the emergency buttons at the
front of the
Reading emergency image plates with ID data
To read an emergency image plate with ID data:
1
Make sure the cassette has been identified properly via the ID Station.
2
Check that the CR 35-X is ready for operation:
•
The CR 35-X must display the operator main screen with 'Ready' status, e.g.:
QS not ready
48
Reading an emergency image plate
.
CR 35-X
READY Status field
4454C EN 2013-05-14