Maserati Grecale 2022 Owner's Manual page 36

Table of Contents

Advertisement

Understanding the Vehicle
The figure represents an example of
the car that is travelling in the following
scenarios:
2
1
two vehicles ahead in the same
direction;
2
another vehicle that is overtaking;
3
another vehicle proceeding in the
opposite direction.
The system is able to detect and react
to an oncoming vehicle starting from
a distance of about 400 m (437 yd),
within a second. Instead, in case of the
preceding vehicles, the system is able
to detect and react in a second starting
from a distance of about 100 m (109 yd).
Activation Mode
The digital camera is the same used
for the automatic high beam, and like
automatic high beam also for "Glare
Free" function it needs to be activated
by MIA "Settings" menu of "Vehicle"
34
page, insert the check mark on the box
of the "Auto Dim High Beams" function
(see chapter "Functions of Settings
Menu on MIA" in section "Dashboard
Instruments and Controls").
The "Glare Free" function will be
engaged only if the engine is running.
The "Glare Free" function will work
only if the vehicle speed is equal or
greater than 35 km/h (21.7 mph) in the
engagement phase of the function.
Once the system will be active, there
will be two indicators on the instrument
cluster, showed at the same time: one
blue and one green.
The green indicator indicates that the
position lights are on; the blue indicator
indicates that all or only some high beam
LEDs are physically on in that moment.
When instead there is the needing to
switch off the whole high beam module
to obtain the no glaring effect, on the
instrument cluster there will be the green
position lights indicator and the auto
high beam indicators in white.
When the scenario allows the partial or
full use of high beam with no glaring
disturbance, the blue indicator will
appear again.
NOTE:
Some unpredictable conditions,
such as dirt, dust, film or any other
obstruction on camera lens zone
events could affect "Glare Free"
function making it working improperly.
Heavy rainy and foggy weather could
affect system performance, leaving the
full beam switched on for longer time
than the nominal working condition.
This could cause a glaring disturbance
for other vehicles, to avoid this the
driver has to switch off the high beam
manually.
In phase of disengagement of the
function, the minimum operating speed
is 25 km/h (15.5 mph).
"Glare Free" function proper operation
is guaranteed if vehicle speed is less
than, or at least equal to 250 km/h (155
mph).

Advertisement

Table of Contents
loading

Table of Contents