Table of Contents
Advertisement
Dashboard Instruments and Controls
or "High" level. "Medium" is the default
setting.
The system will retain its last known
configuration state through ignition
cycles.
•
Rear ParkAssist Volume
When this function is selected, the
chime volume of rear park assist
sensors can be set to "Low", "Medium"
or "High" level.
"Medium" is the default setting.
The system will retain its last known
configuration state through ignition
4
cycles.
•
Active Park Braking
When this function is selected, when
the vehicle move backwards in R
(Reverse mode) at a very low speed
and an obstacle is detected, the system
brakes automatically.
•
Side Distance Warning
When this function is selected, the
surround screen visualize 4 more arcs
on the vehicle sides in the top view.
•
Drowsy Driver Alert
The system monitors driving behavior
and provides alerts when driving
behavior suggests driver may be
drowsy.
•
Blind Spot Alert
Activating this function the system
will try to prevent collision between
124
host vehicle and potential blind spot
collision hazard.
This function can be set in "Off",
"Lights" or "Lights + Chime".
See "Blind Spot Assist - BSA" in section
"Driver Assistance Systems" for more
details.
•
Hill Start Assist
By selecting and check-mark this
function, this system provides start
assistance when the vehicle is on an
incline.
•
Passenger airbag
By selecting this function, this current
status of the front passenger airbag is
changed and it is visualized on the front
dome console.
Clock & Date
Time is visible on the dashboard smart
clock (see Smart Clock" in this section)
and on the instrument cluster and on the
MIA display.
With this function it is possible to view
and set the following modes.
•
Sync with GPS Time
Time is normally automatically
synchronised with the radio signal.
It is also possible to set automatic
synchronisation mode using GPS signal
instead.
•
Set Time Hours
With "Sync with GPS Time" function
unchecked and this mode selected, you
can set the hours manually from 1 to 24.
To select, touch the "+" or "–" soft-keys
to adjust the hours.
•
Set Time Minutes
With "Sync with GPS Time" function
unchecked and this mode selected, you
can set the minutes manually from 0 to
59. To select, touch the "+" or "–" soft-
keys as done for the hours.
•
Time Format
When in this mode, you can select the
time format display. To change the
current setting, touch and release the
"12 h" or "24 h" soft-key.
•
Show Time In Status Bar
This function will allow you to turn on
or shut off the digital clock in the upper
status bar.
•
Set Date (in Cluster)
When in this mode, you can set the
date manually on the instrument cluster
display. Touch the "+" or "-" soft-keys
to adjust day, month and year.
•
Show Time and Date During Screen Off
When in this mode, you can display the
digital clock and date during screen off.
Phone/Bluetooth
Touch this soft-key to select the function
related to the connect phones.
•
Device Manager
Advertisement
Chapters
Table of Contents
