Surround View Camera System ( ) - Maserati Grecale 2022 Owner's Manual

Surround View Camera
System ( )
System components
The system uses four cameras to
monitor the area around the vehicle,
placed on the front grid, under the side
rear-view mirrors and on the liftgate,
between the number plate lights.
When the transmission is set in R
(Reverse) mode the top view and rear
view of the surrounding scenario will be
automatically displayed on MIA display.
Image will be displayed with active
guidelines, if activated in the setting list,
as long as vehicle remains in R (Reverse)
mode.
When vehicle is shifted into a different
gear, if the camera delay is activated on
the MIA screen, the image will remain
displayed for about 10 seconds unless
the vehicle speed exceeds 13 km/h (8
mph). If the transmission is shifted in P
(Park) mode, the surround view screen
will be immediately cancelled and the
radio will return to the last-viewed
screen.
Instead, when the transmission is set in
P (Park), N (Neutral) or D (Drive) mode
it is possible to activate the system by
touching the "Surround View Camera"
soft-key in "Controls" menu of the
Driver Assistance Systems
"Vehicle" or in the App page, if the
vehicle speed is below 13 km/h (8 mph);
otherwise the soft-key becomes greyed.
If manually activated in these ways, the
camera view will expire after 10 seconds
the vehicle speed exceeds 13 km/h (8
mph).
Once the "Surround View Camera"
screen is displayed, it is possible
to choose which images to display
according to 4 possible views.
Rear view and top view
Rear cross path view and top
view
Front cross path view and top
view
Front view and top view
In any gear shift mode, when "Surround
View Camera" screen is displayed, a
pop up message will appear in the upper
6
209