Maserati Grecale 2022 Owner's Manual page 236

Driver Assistance Systems
Emergency Lane Keeping (ELK)
Intervention
WARNING!
In special cases like vehicle oncoming,
vehicle overtaking, newjerseys or
guardrails, Active Lane Management
(ALM) may make an unexpected
steering torque application. Lack of
attention may lead to serious injury or
death.
Speed Range of Use
Speed
Minimum
Engaged/activated
Maximum
6
Customised Settings
ALM is configurable by the customer
in order to maximize its efficiency
based on the driver driving style and his
expectation of the system, reducing at
the same time the possible invasiveness.
Entering "Settings" menu of the "Vehicle"
page on MIA display the driver can see
the current setting beside the "Active
Lane Management" soft-key.
Touching "Active Lane Management"
soft-key to enter the setting page.
234
The system can be set to "Vibration
only", "Steering Assist only" and
"Vibration + Steering Assist".
lane Warning can be set to "Early"
(default mode), "Medium" and "Late".
Vibration Strength can be set to "Low"
(default mode), "Medium" and "High".
Steering Assist Strength can be set to
"Low" (default mode), "Medium" and
"High".
Meanings of Settings
"Vibration and Steering Assist": the
system will apply steering torque when
lane departure is detected showing
km/h (mph)
at the same time the proper cluster
indication, adding to this steering
60 (37)
vibration when the departure is very
60 (37)
imminent.
180 (112)
When "Vibration and Steering Assist" is
selected and of course ALM is enabled
then two following menu will be used by
the system.
• "ALM Lane Warning": it tunes the
distance to the lane boundary
interested where the system will start
to apply steering torque.
• "ALM Vibration and Steering Assist
Strength": it tunes the vibration,
steering torque and speed value
increasing or decreasing it to have
a stronger or weaker trajectory
correction/deviation.
WARNING!
In rare cases, Active Lane Management
(ALM) may make an inappropriate
steering torque application. ALM may
be interrupted at any time by counter
steering. Lack of attention may lead to
serious injury or death.
System Availability
The ADAS systems help the driver while
driving. These systems can be set and
monitored simultaneously on the display,
after opening "Driver Assist" menu
(see "Main Menu Contents" in section
"Dashboard Instruments and Controls").
When you are not in the "Driver Assist"
page, the system status is displayed in
the right digital dial (ADAS area).
ALM is designed for an attentive driver
therefore the system is available only
when his/her hands are on the steering
wheel or with hands off for a very limited
amount of time. When the system is
enabled it will trigger cluster warning
in case hands are not detected on the
steering wheel.
The torque application as well as the
vibration are suppressed/inhibited in
case of: high driver torque in the steering
wheel, high lateral acceleration, hands
not on the steering wheel detected for
more than a certain time.