Maserati Grecale 2022 Owner's Manual page 143

Move the right multifunction lever
upwards (unstable position) or
downwards (unstable position) to
activate the MIST function respectively
for the windshield and the rear window:
its operation is limited to the time for
which the lever is held in this position.
When released, the lever will return to its
default position and the windshield or
rear window wiper automatically stop.
This function is useful to remove small
deposits of dust from the glasses, or
morning dew.
NOTE:
MIST function does not activate the
washer; washer fluid will not therefore
be sprayed onto the glasses. To spray
washer fluid onto the glasses, the
washing function must be used.
With ring in position or
windshield wiper will automatically
adapt its operating speed to the speed
of the car.
"Smart washing" Function
Pull the right multifunction lever
towards the steering wheel (unstable
position) to operate the windshield
washer. Keep the lever pulled to
activate both the windshield washer
jet and the windshield wiper with a
single movement; the latter turns on
automatically.
The windshield wiper stops working
three strokes after the lever is released.
A further stroke after approx. 6 seconds
completes the wiping cycle.
Head Windshield Washer
Nozzles ( )
To avoid fluid freezing inside at low
external temperatures, the fluid supply
nozzles can be heated by internal
resistors.
Rain Sensor Operation
The rain sensor is located behind the
interior rear view mirror, in contact
with the windshield and can detect the
presence of rain and, consequently,
manage the cleaning of the windshield in
accordance with the amount of water on
the windshield.
, the
Dashboard Instruments and Controls
The sensor has an adjustment range
which varies progressively from wiper
still (no stroke) when the windshield is
dry, to wiper at 2nd continuous speed
(fast continuous operation) with intense
rain.
Positions and correspond to
sensitivity level 1 and 2 of the rain
sensor.
Activation
Turn the ring of the right multifunction
lever to position or
rain sensor.
The activation of the sensor is signaled
by a flick of the wiper (indicating that the
command has been acquired).
The variation in sensitivity during rain
sensor operation is also signaled by a
flick of the wiper (command acquired
and implemented). This stroke is also
executed with the windshield dry.
4
to activate the
141