Maserati Grecale 2022 Owner's Manual page 30

Understanding the Vehicle
visible image on the internal rear-view
mirror.
Power mirror preselected positions
can be reset by operating the optional
memory driver seat device. Check
2
"Memorize the Driver's Seat Position" in
this section for further information.
WARNING!
Vehicles and other objects seen in the
external side convex mirror will look
smaller and farther away than they
really are. Use the inside mirror to judge
the size or distance of a vehicle seen in
the external side convex mirror.
Tilt Side Mirrors In Reverse
This function provides automatic
external rear-view mirrors positioning,
allowing the driver to view the ground
area behind the front doors. The external
mirrors will move slightly downward
from the current position when the
transmission is into (R) reverse mode.
The external mirrors will then return
to the original position when the
transmission is moved out of the (R)
reverse mode.
Each memory set of the driver's seat (see
"Memorize the Driver's Seat Position"
chapter in this section) corresponds to a
mirror tilt position in reverse.
28
NOTE:
The mirrors tilt in reverse can be turned
on and off using the MIA system, refer
to "Functions of Settings Menu on MIA"
in section "Dashboard Instruments and
Controls".
Folding Mirrors
By selecting this function on MIA the
rear-view mirrors automatically fold
when the vehicle is locked by the key
fob and when the power liftgate is
closed and locked by pressing the
button on the right ledge of the liftgate
interior trim . When the vehicle and
the liftgate will be unlocked and the
ignition device is set in ON position, the
rear-view mirrors will automatically open
in the position they had before the lock.
The switch for the power folding mirrors
is located on the drivers's door trim
panel.
With the inner ring in position 0 move it
to position to fold the mirrors.
Turn the inner ring to position L, R or 0 to
return the mirrors to the driving position.
There is a way to make external mirrors
automatically fold/unfold.
• If the function is available, it needs
to be activated by MIA (refer to
"Functions of Settings Menu on MIA" in
section "Dashboard Instruments and
Controls").
• If the mirrors are automatically folded
after the last lock action, then they will
automatically unfold when the ignition
device is set in ON position.
• If the mirrors were manually folded by
the switch on the driver's door panel,
before a lock action, they will need to
be manually unfolded to reactivate the
automatic function.