Maserati Grecale 2022 Owner's Manual page 246

Driver Assistance Systems
steering wheel. Once the conditions are
met, ADA will engage. The system will
engage even pressing ADA
and then set ACC.
CAUTION!
The Active Driving Assist (ADA) system
may take up to 5 seconds to engage
once all conditions are met.
6
The conditions for ADA to engage are as
follows:
• ADA must be turned on or enabled.
• ACC must be engaged.
• Left and right visible lane lines.
• Vehicle speed must be between 0 and
148 km/h (0 to 92 mph).
• No faults in the forward facing camera,
radar, EPS, or MIA.
• Lane width between 2.7 and 4.2 m
(2.95 to 4.6 yd).
• Turn signal not activated.
• No faults related to this system.
244
Speed Range of Use
Speed
button
Minimum
Engaged/activated
(with ACC engaged)
Engaged/activated
(with ACC not en-
gaged)
Maximum
• If set above the maximum speed, ADA
will not function after the vehicle speed
will reach the maximum speed.
• If set below the maximum speed and
the ACC target speed is increased,
ADA will function up to the maximum
speed and then the system will turn off
automatically.
• When the ACC target speed is
reduce and speed is lower than the
maximum speed, the system will start
automatically.
• If the ACC target speed is set under
the maximum speed, ADA is active
and vehicle speed increases above the
maximum speed due to slope, ADA will
continue to function.
Monitoring on Cluster Display
ADA and the other ADAS systems
conditions can be monitored on display
by accessing the "Driver Assist" page
with the buttons on the steering wheel
(see "Instrument Cluster Settings and
Menu Overview" in section "Dashboard
km/h (mph)
Instruments and Controls").
0
The symbol in grey indicates that the
ADA system is active, but not engaged
0
and is shown at the centre of the
display when the "Driver Assist" page is
30 (20)
displayed.
When exiting the "Driver Assist" page,
the ADA information is displayed in the
148 (92)
right digital dial (ADAS area).
In addition to these symbols, on the left
and right edge a coloured glow may
appear (further referred to as "attention
level colour"). Attention level colour
together with the outline of the symbol
represent a further indication of the
system status.
When exiting the "Driver Assist" page,
the attention level colour will always be
displayed until the system is disabled