Maserati Grecale 2022 Owner's Manual page 112

Dashboard Instruments and Controls
Temporary AWD Failure Warning Light
The symbol will appear to
indicate that the AWD dynamic
control system is temporarily
deactivated to prevent damage because
of high engine load. The traction system
will work in RWD mode in this case.
Until the symbol appears on the display,
reduce the load to allow the system to
cool down. The AWD system will resume
normal operation when the symbol
disappears from the display.
Drowsy Driver Detection (DDD) Failure
4
Warning Light
The symbol comes on in the
event of a DDD (Drowsy Driver
Detection) system failure. In
these cases, contact the Maserati
Service Network as soon as possible.
Suspension Lifter System Failure
Warning Light
This warning light illuminates
to indicate a failure of the
Suspension Lifter system. In
this case, avoid using the system and
contact the Service Network as soon as
possible to have the failure eliminated.
Suspension Lifter System Failure
Warning Light due to payload
This warning light illuminates to
indicate a excessive payload on
the suspension lifter system. In
110
this case lighten the vehicle to get the
warning light switched off.
Forward Collision Warning (FCW) and
Pedestrian Emergency Braking (PEB)
Fault
This warning light informs that
FCW and/or PEB is in fault state
and the autonomous braking
may not be available. If this occurred
together with other specific messages,
could mean that a system fault requiring
servicing at the Service Network.
It is nevertheless possible to drive the
vehicle without using this function
(for further details, refer to "Forward
Collision Warning - FCW" in section
"Driver Assistance Systems").
Active Driving Assist (ADA) Fail
This warning light will turn on
to indicate a failure of the ADA
system.
Contact the Service Network as soon as
possible avoiding using this system.
Speed Limiter (SL) Failure Warning Light
This warning light illuminates
when SL system is not operating
or needs servicing.
Contact the Service Network
as soon as possible avoiding to use this
system.
Cruise Control (CC) Fault
This warning light turns on when
CC is not operating or needs
servicing, For further details,
refer to "Cruise Control - CC" in section
"Driver Assistance Systems".
Adaptive Cruise Control (ACC) Fault
This warning light turns on when
ACC is not operating or needs
servicing, For further details,
refer to "Adaptive Cruise Control - ACC"
in section "Driver Assistance Systems".
Start&Stop Failure Warning Light
This warning light illuminates
when there is a failure in the
Start&Stop system. Switch
the engine on or off using the normal
procedure with the ignition device
START/STOP and have the vehicle
checked at a Service Network.
Start&Stop Active Indicator Light
This indicator light indicates that
the engine has been switched off
automatically by the Start&Stop
system.
When the engine starts again, this
indicator light will switch off.
See chapter "Automatic Start&Stop
System" in section "Starting and Driving"
for further information.