Table of Contents
Advertisement
•
Start&Stop system faults are present.
Automatic Restarting of the
Engine
The engine may automatically restart,
before the brake pedal has been
released, when one of the following
conditions occurs:
•
The SPORT drive mode is being
activated.
•
If the Start&Stop function has been
disabled through the Start&Stop soft-
key on the Comfort Display.
•
If transmission is moved to R (Reverse)
mode.
•
If the steering wheel is moved to steer
the wheels.
•
When the temperature conditions
inside the vehicle do not correspond to
the air conditioning setting.
•
When changing the temperature setting
on the air conditioning.
•
When the defroster function is being
activated.
•
When the battery charge is below
safety value.
•
When the accelerator pedal is being
pressed (together with the brake
pedal).
•
If a long time has passed since the last
automatic stop of the engine.
Occupants Safety Function
To enhance occupants safety, the
Start&Stop system monitors if the
driver is present and does not allow
automatic restarting of the engine if one
of the following manoeuvres is being
performed while in "AutoStop" condition:
•
The driver opens the door and releases
the brake pedal.
•
The driver opens the door and
unbuckles the seat belt.
•
The driver opens the hood.
All the above-mentioned conditions
deactivate the Start&Stop function (the
"AutoStart" is deactivated and the
engine remains off) and the transmission
shift automatically in P (Park) mode.
The
telltale will be disabled to
indicate the Start&Stop function
disabling. To restart the engine it is
necessary to press the brake pedal and
push the START/STOP button or shift
into gear.
Push the D (Drive) button to drive away.
WARNING!
•
Even when the vehicle is stopped
in the "Stop (AutoStop)" phase, the
driver is responsible for the vehicle
and the occupants and shall take care
Starting and Driving
of what happens inside and outside
the vehicle.
•
Even when the vehicle is stopped
within the "Stop (AutoStop)" phase,
the vehicle driver is responsible for
the vehicle, the vehicle's occupants
and the vehicle's surrounding area.
Never leave the vehicle unattended
with the engine running; doing so
poses a risk of danger. It is a good
practice to always ensure to set
the parking brake and shift the
transmission into the P (Park) mode,
thereby ensuring the vehicle will not
move, when performing any vehicle
checks, maintenance and/or service
procedures on the vehicle.
Start&Stop Function Disabling
Start&Stop enabled is the default status.
Under certain driving conditions, when
frequent stops and restarts of the engine
may become annoying, it is possible to
turn off the Start&Stop function.
When the Start&Stop function is turned
off in the all following ways, the white
indicator
on the cluster display
indicated in the picture will turn on.
Touch the
OFF on the bottom bar
of the screen of the Comfort Display.
Touch a second time the same soft-key
to re-enable the function
5
157
Advertisement
Chapters
Table of Contents
