enphase ENV-S-WM-230 Installation And Operation Manual page 27

View or Change Wi-Fi Settings
When the Envoy is using Wi-Fi to connect with Enlighten,
select > to view Wi-Fi configuration information. From here
you view Available Networks (WPS and AP), Update
Country, Enable AP Mode, and view Device information.
If you replace the broadband router at the installation site, you
need to update the connection information on the IQ
Gateway. To do this:
•
Select Connect Other Network.
•
Enter the new Wireless Network Name (ESSID) and
Security code.
If you need to disconnect the Envoy from a Wi-Fi network:
•
Select More Info.
•
Click Forget this Network.
27 © 2022 Enphase Energy Inc. All rights reserved.
IQ Gateway-M Installation and
Operation
141-00031 Rev 02