Connecting To Iq Gateway; Connect Using The Enphase Installer App; Method A: Use The Site's Wireless Router To Connect To The Iq Gateway; Method B: Create A Wireless Access Point - enphase ENV-S-WM-230 Installation And Operation Manual

Connecting to IQ Gateway

There are several ways to connect with the IQ Gateway to check status or do configuration tasks:
•
Connect wirelessly using Installer Toolkit
•
Connect remotely using Enlighten
•
Connect using a computer or mobile device with the IQ Gateway local interface

Connect Using the Enphase Installer App

The Enphase Installer Toolkit is a mobile app that provides installers with onsite system configuration
capabilities.
Options for establishing a connection between the Enphase Installer App and the IQ Gateway are:
•
Connect the mobile device to the same LAN as the IQ Gateway using the site's wireless router.
•
Use the IQ Gateway to create a wireless Access Point (AP).

Method A: Use the Site's Wireless Router to Connect to the IQ Gateway

To use the site's wireless router, select Settings on your mobile device and then select Wi-Fi. Tap the
network you want to join from the list of available networks.

Method B: Create a Wireless Access Point

You can connect to Envoy without using the onsite router by creating a wireless Access Point (AP). Use
the IQ Gateway built-in Wi-Fi functionality to do this. AP mode supports use of a mobile device and times
out after eight hours. The AP Mode LED
you to connect the IQ Gateway to Installer Toolkit so that you can track system installation progress.
To start an AP session:
1. Briefly press the AP Mode button to start an 8-hour AP session on the IQ Gateway. The AP
Mode LED lights solid green when AP mode is active.
2. The AP Mode LED
out after eight hours. This LED is usually off during normal IQ Gateway operation.
22
lights solid green when AP mode is active. AP Mode allows
remains solid green when AP mode is enabled and active. AP mode times
© 2022 Enphase Energy Inc. All rights reserved.
IQ Gateway-M Installation and
Operation
AP Mode LED
AP Mode button
141-00031 Rev 02