Iq Gateway Operation; Iq Gateway Displays And Controls; Iq Gateway Led States - enphase ENV-S-WM-230 Installation And Operation Manual

IQ Gateway Operation

IQ Gateway Displays and Controls

You can track system installation progress with the Enphase Installer Toolkit mobile app.
The LEDs on the IQ Gateway are solid green when a function is enabled or performing as expected,
flashing when an operation is in progress, or solid red when troubleshooting with Installer Toolkit is
required.
— Network Communications LED: Green when IQ Gateway is connected to Enlighten.
— AP Mode LED: Green when Envoy's AP Wi-Fi network is available.
— AP Mode Button: Press to enable Envoy's AP Mode for connecting with a mobile
device. Hold for 5 seconds to start WPS connection to a router.
— Power Production LED: Green when microinverters are producing power.
— Microinverter Communications LED: Green when microinverters are
communicating with IQ Gateway.
— Device Scan Button: Press to start/stop 15 minute scan for microinverters over
the power line.

IQ Gateway LED States

LED
All
Network
Communications
AP mode
Power
production
Microinverter
Communications
20
State
Flashing red in unison
Flashing green sequentially Software upgrade in progress
Solid green
Flashing green
Red
Off
Solid green
Off
Solid green
Flashing green
Red
Off
Solid Green
Flashing Green
Red
Off
© 2022 Enphase Energy Inc. All rights reserved.
IQ Gateway-M Installation and
Operation
Description
The IQ Gateway is booting up
Communicating with Enlighten
WPS connection in progress or the IQ
Gateway is attempting to connect to Enlighten
Local network connection only
No network connection
AP mode enabled:
Envoy Wi-Fi network available
AP mode disabled:
Envoy Wi-Fi network unavailable
All communicating microinverters are producing
Microinverter upgrade in progress
At least one microinverter is not producing
Microinverters are not communicating
(low light or night time)
All microinverters are communicating
Device scan in progress
At least one microinverter is not communicating
Microinverters are not communicating
(low light or night time)
141-00031 Rev 02