3. Select Settings on your mobile device and then select Wi-Fi. Tap "ENVOY_nnnnnn" (where
"nnnnnn" represents the final six digits of the Envoy serial number) from the list of available
networks.
Complete the Connection to IQ Gateway with Installer Toolkit
Once your mobile device and the Envoy are on the same LAN, you can connect to the IQ Envoy.
1. In Installer Toolkit, go to the Systems tab and go to Step 4 (Envoy connectivity).
2. Make sure your device is connected to Envoy by looking for the green check mark between
the Installer toolkit (or the phone icon) and the Envoy as shown.
Refer to
enphase.com/installer-toolkit/
23
for more information on the Enphase Installer Toolkit.
© 2022 Enphase Energy Inc. All rights reserved.
IQ Gateway-M Installation and
Operation
141-00031 Rev 02