Secondary Functions - Strymon DIG User Manual

DIG
- Dual Digital Delay User Manual

Secondary Functions

DELAY 1
SUBDIVISION
Sets a Tap Tempo
subdivision for
Delay 1. Turn left for
Dotted Eighth
note,
center for Quarter
right for Half note.
Quarter note is default
operation.
SYNC/FREE
MODE
Turn to right side of knob
to engage Free Mode.
Disables time sync and
subdivisions between
Delay 1 and Delay 2. Gives
Time 2 knob a full delay
range from 20ms to 1.6s.
Turn to left side of knob
Sync Mode.
to engage
Enables time sync and
subdivisions between
Delay 1 and Delay 2.
Sync Mode is default
operation.
note,
Press and hold both footswitches
simultaneously while turning the desired knob
to access the secondary functions.
DELAY 2 REPEATS
Delay 2 Repeats.
Sets the
Track
Turn fully right to
Repeats, which ties Delay 1
and Delay 2 repeats together.
Track Repeats is default
operation.
FILTER
Sets feedback filter
response. Turn left for
High Cut, center for Flat
response, right for Low
Cut.
Flat response is default
operation.
CONFIG
Turn left for Series,
Ping Pong,
center for
Parallel
or right for
configuration.
Series is default
operation.
See page 4 for detailed
Config information.
pg 3
®