Rear Panel Functions - Strymon Riverside Quick Start Manual

REAR PANEL FUNCTIONS

PRESENCE
Tailors the top end character of the output to match
your amp. Try minus (-) or center in front of an amp.
Try plus (+) when plugging straight into a power amp.
IN
Mono instrument input.
OUT
Mono signal out.
BOOST
Boost Switch Mode - Use an external switch to toggle up to
+6dB of post-boost on/off (default configuration).
Boost input can be used in several ways. See user manual for
additional configurations.
Download the full Riverside manual at
EXP
Volume Pedal Mode – Use a
standard TRS expression pedal to
control of the output volume of the
effect (default configuration).
Expression input can be used in
several ways. See user manual for
additional configurations.
POWER
Use an adapter with the following
rating: 9VDC center negative.
250mA minimum.
strymon.net/support/riverside