Table of Contents
Advertisement
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following the general safety information
and the instruction manual and by using common sense, you will have a great and safety use
of your Kellfri product for many years. Kellfri designs and delivers effective, affordable ma-
chinery and components for forest, agriculture,construction and gardening in Sweden, other
Nordic countries and Europe.
PRODUCTINFORMATION
Chip wood waste, small trees, branches and twigs and use it as fuel for heating, to cover gar-
den beds, the basis for exercise trails, compost etc. Simple and strong construction without
V-belt for a smooth operation. The wood chipper is mounted on the tractor's three point link-
age. The Outthrowing part is rotatable. Splintering wood with a maximum of 100 mm in trunk
diameter and brushwood up to 250 mm. The machine comes as standard with PTO shaft.
TECHNICAL DATA
L x W x H
Cutting disc
Knives
MAX diameter of timber
RPM
Power requirement
Weight
Input opening
Output opening
Wood chip tube rotation
Twig breaker
MACHINE
The implement is intended to chip wood waste, twigs and branches.
NOTE! The machine can be dangerous misuse, therefore, it requires that the user of the machine
2
has sufficient knowledge of how the machine is used and works!
13- WC10
1016 x 1067 x 1524 mm
635 mm
4 st mooving och 1 stationary (härdat stål)
upp to 100 mm
540/ 1 000 rpm
30 - 45 hp
215 kg
500 mm x 500 mm
100 mm x 250 mm
360 °
No
Advertisement
Table of Contents
