Product Safety Information - Kellfri 13-WC10 Operating Instructions Manual

Table of Contents

Advertisement

SAFETYINFORMATION
Before using the product, please read the safety information and instruction manual and under-
stand its contents for your own and others' safety. Always keep the safety information and
instruction manual easily accessible to the user of the product. Remember that it may be good for
your own and others' safety to read the safety information every now and then. If the instructions
manual is damaged or otherwise unusable, please contact and order a new one from: Your retailer
The general safety instruction is also available from Kellfris website: www.kellfri.co.uk
Do not use this equipment if you are feeling sick, tired or in influence of alcohol. Nor if you are
under the influence of strong medications or drugs, suffering from strong depression or severe
mental illness. Always follow the general traffic rules and regulations and the rules of the Animal
Welfare Act. Persons under 15 years old and people with mental illness may not
use these product.
Warning!
PRODUCTSAFETYINFORMATION
Read the instruction manual carefully before using this product. The product may only be
used in the manner described in this manual.
Keep the work area free from other people, moving parts, increasing the risk of accidents.
Respect implement risk zone! Only you who drive should stand near the machine during
operation. Children must never be staying within the work area, never let children play with
the machine.
The tool works best and safest when it is used in this capacity it is intended for, do not try by
various means to increase machine capacity. Never overload the machine.
Never leave the machine unattended when it is running. Turn off the tractor engine and
tighten
parking brake when you leave the piece of equipment, even for a short while.
Never leave the gear retracted. The hydraulics can lose pressure and as aresoult the imple-
ment could fall down.
Ensure that all guards are always installed and can not come off before use.
The PTO shaft must be protected over its entire length. Make sure to anchor the safety chain
well.
The machine should always be disconnected before maintenance or service.
The machine may not be used without feeder and hopper.
Do not drive with the chipper if excessive vibration occurs, stop the machine immediately
and check the maintenance schedule.
Do not use the machine unless all safety precautions are taken
Do not climb on the chipper!
NEVER try to remove things that stuck in the wood chipper while it is running!
Ensure that the equipment has stopped spinning before any action is taken.
Never place  any body part in the machine while it is running.
The machine may only be lifted on the designated lifting points. Use only suitable lifting
equipment with the enough lifting capacity to lift the machine.
The product must not in any circumstances be
modified without permission from the manufac-
turer. Unauthorized modification of the machine
and/or accessories can cause fatal injuries or death
to operator or others.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chipper 100

Table of Contents