Table of Contents
Advertisement
INTRODUCTION
Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions,
operating manual and sound common sense will guarantee many years of enjoyment using
the product. Kellfri's equipment and products are aimed at self-employed farmers, horse en-
thusiasts and other country-dwellers who have stringent demands on performance.
PRODUCT INFORMATION
• Powerful blades
• Lateral displacement
• Large number of possible settings
• Powerful spring-loaded cutting disc
• Front mounted for clear overview
Efficient strimmer for the tractor's frontloader.
A front mounted strimmer is ideal for you if you want to have a good overview while you are
cutting. Attaching the strimmer to your Euro or Trima attachment gives you a better view of the
cutting head, giving you better cutting precision.
The strimmer is side-mounted in a frame for your loader. The strimmer head can be manually
adjusted inwards or outwards from your frontloader, giving you greater reach. The head is also
jointed to enable it to follow the ground.
Hydraulic lateral displacement and spring-loaded cutting disc ensures effective cutting under
fences and edges of buildings, railings and road verges. The guard plate hits the post and springs
back out of the way to return to its starting position, ensuring a close cut around the post.
The head is spring-loaded, so that if it hits a post the guard plate and head spring backwards. The
spring function allows you to cut right under the fencing wire and around your posts without
adjusting the tractor's direction of travel.
Powerful abradable blades mounted on a blade arm to cope with uneven vegetation.
A guard plate underneath prevents the blades from hitting the ground and allows you to posi-
tion the disc against the ground and easily operate forwards at an even height.
25 cc hydraulic engine from Parker (built-in pressure limiter)
The Parker engine gives you a safe, dependable product of the highest quality and a mainte-
nance-free engine that operates the blades with hydraulic oil pressure.
Supplied with frame for mounting cutting head, fits both Euro and Trima attachment, hoses with
½" male coupling and stabiliser for parking.
TECHNICAL DATA
Length
Working width
Blades
Engine
Oil flow
Rotors
Table of contents
35-HKKFE (Euro)
Extended position: 1850 mm
Retracted position: 1100 mm
From centre frame to centre engine
800 mm
2 pcs
Parker 25 cc (built-in pressure
limiter)
At least 30 l/min - max 60 l/min
Max pressure: 190 bar
1 pc
35-HKKFT (Trima)
Extended position: 1850 mm
Retracted position: 1100 mm
From centre frame to centre engine
800 mm
2 pcs
Parker 25 cc (built-in pressure
limiter)
At least 30 l/min - max 60 l/min
Max pressure: 190 bar
1 pc
3
Advertisement
Table of Contents
