Table of Contents
Advertisement
ADJUSTING THE CHIP LENGTH
It is the distance between the cutting knives and the counter knife which determines the chip
size. Wood chips size is set by moving the cutting knife inward or outward. The greater the
distance is between the blades, the larger chips you get.
MOUNTINGINSTRUCTION
10
IMPORTANT!
When adjusting the knives, it is important that the cutting blades do not
touch the counter knife and cutting distance is the same on all of them.
Always check that all the fixing bolts are tightened
For better chip quality adjust the cutting size to the material. Reduce
chip size when chipping small and tough material such as pine branches.
When chipping larger materials in the machine as logs , the chipping
size should be increased.
Mount the funnel, tighten all the
bolts (4 pcs)
Advertisement
Table of Contents
