2.3 System Configuration
Figure 2.1 System configuration
Product (1) shown in Figure 2.1 is this product. Get (2) to (4) separately.
(1) Pod probe (M30220TF-PRB)
(2) Pitch converter board for 144-pin 0.5-mm-pitch LQFP (FLX-144NSD)
(3) Pitch converter board for 144-pin 0.4-mm-pitch TQFP (FLX-144NSE)
(4) Pitch converter board for 120-pin 0.4-mm-pitch LQFP (FLX-120NSE)
For details on the connection, refer to "3.4 Connecting the Target System" (page 22).
This pod probe is for flash memory rewrite mode debug of M30220 and M30221 Group MCUs.
The evaluation MCUs M30220GP-EVA and M30220GP-PORT are mounted on it.
This is a pitch converter board (separately available) to be mounted on the foot pattern for 144-
pin 0.5-mm-pitch LQFP prepared on the target system.
This is a pitch converter board (separately available) to be mounted on the foot pattern for 144-
pin 0.4-mm-pitch TQFP prepared on the target system.
This is a pitch converter board (separately available) to be mounted on the foot pattern for 120-
pin 0.4-mm-pitch LQFP prepared on the target system.
( 15 / 54 )