Using The Remote Control - SMART Board MX Series User Manual

Chapter 2 Using basic features
No. Name
Screen shade
3
4 Freeze
Volume decrease
5
Volume increase
6
7 Power
8 Menu
9 Mute

Using the remote control

The display comes with one of two infrared remote control models. These models are similar, except one
has a screen sharing button.
Use the infrared remote control to turn the display on or off, change the input source, change the
volume, access the display's iQ apps, and more. You can also use the remote control to open the on-
screen menus and change the display's settings.
Important
Do not subject the remote control to strong shock.
l
Keep the remote control away from liquids. If it gets wet, wipe it dry immediately.
l
Do not expose the remote control to heat or steam.
l
Do not open any part of the remote control other than the battery compartment.
l
smarttech.com/kb/171554
Procedure
Press to hide screen contents behind a screen
shade (see Freezing or hiding the screen on
page 23).
Press to freeze and unfreeze the screen (see
Freezing the screen on page 23).
Press to turn down the volume (see Adjusting the
volume on page 22).
Press to turn up the volume (see Adjusting the
volume on page 22).
Press to wake the display (see Waking up the
display and putting it back to sleep on page 14).
Press again to enter Sleep mode (see Waking up
the display and putting it back to sleep on
page 14).
Press to open the display's settings.
Press to mute or unmute the volume.
16