Using Touch - SMART Board MX Series User Manual

Chapter 2 Using basic features
No. Name
1 MUTE
2 SOURCE
3 INFO
4 SYS
5 AUDIO
6 VOL + / VOL -
7 [Number buttons]
8 POWER
9 FREEZE
Note
The buttons listed in this table and highlighted in gray in the image above are the only ones that have
an effect on the display. Pressing the other buttons will make the remote control sensor flash, but they
have no effect.

Using touch

You can do everything on the display that you can do at your computer—open and close applications,
meet with others, create new documents or edit existing ones, visit websites, play and manipulate videos,
and so on—by touching the display's surface.
You can use a variety of gestures within applications, including panning, scaling, rotating, and zooming
in and out.
The display's support for up to 20 simultaneous interaction points enables you and other users to interact
with objects on the screen at the same time.
smarttech.com/kb/171554
Function
Mute or unmute the volume
Open the input source menu
Press to show the display's detected
resolution and refresh rate for the current
input source
Open the display's settings
Change the display's audio mode
Increase or decrease volume
Press buttons on the number pad to
customize settings
Wake the display.
Enter Sleep mode.
Freezes the screen.
Note
Freezing the screen does not pause any
applications running on the connected
computer. It simply freezes the display
of those applications.
19