Fatal Error Indications And Error Code Messages - Tele Radio TG-R4-1 User Instructions

FATAL ERROR INDICATIONS AND ERROR CODE MESSAGES

Fatal errors are indicated by function LEDs 1–7, which are all flashing at the same time. Each fatal error
is identified by a code indicated by relay LEDs 1–5.
˜: LED is lit. ™: LED is off
Relay Relay Relay
LED1 LED2 LED3
red red red
˜ ™
™ ˜
˜ ˜
™ ™
˜ ™
™ ˜
˜ ˜
™ ™
˜ ™
™ ˜
˜ ˜
™ ™
˜ ™
™ ˜
˜ ˜
™ ™
˜ ™
* TG-R4-6, TG-R4-8 or TG-R4-10 models only.
** TG-R4-26, TG-R4-28, TG-R4-41, TG-R4-43 or TG-R4-45 models only.
Relay Relay
LED4 LED5
red red
™ ™ ™
™ ™ ™
™ ™ ™
˜ ™ ™
˜ ™ ™
˜ ™ ™
˜ ™ ™
™ ˜ ™
™ ˜ ™
™ ˜ ™
™ ˜ ™
˜ ˜ ™
˜ ˜ ™
˜ ˜ ™
˜ ˜ ™
™ ™ ˜
™ ™ ˜
- 14 -
Error code Indicates
message
"Invalid PD Invalid/ missing production
CPU3" data in the CPUs
"Wrong SW Incompatible software in the
CPU4" CPUs
"Xapp init Bad settings data
failed"
"No reply No reply from CPU1 or CPU2
CPU1/2"
"Test mode" Receiver in test mode (no
error)
"IF cal. failed" Initialization of the radio
module failed
"Bad exp. in rly" Incompatible expansion board*
"Bad exp. in No CAN expansion board
can" found**
"SIL error" SIL error reported from CPU1
or CPU2
"Bad radio Incompatible radio module
module"
"LML error" LML fatal error
"Bad binDat" Missing or bad binDat
"No binDat ID" No binDat ID in binDat
"LML bad Wrong target software ID in
SWID" binDat
"LML bad SW Wrong target software version
ver" in binDat
"LML bad cclml Wrong cclml version in binDat
ver"
"LML buffer full" Buffer is full