Table of Contents
Advertisement
ORIGINAL INSTRUCTIONS
TABLE OF CONTENTS
Safety Message....................................................................................................................................................4
Safety Instructions..........................................................................................................................................5-11
Machine Installation and Wiring Information ..............................................................................................12-15
Getting to Know your Grinder ......................................................................................................................16-17
Operating Instructions..................................................................................................................................18-38
Keep this manual handy for quick reference. Require all operators to read this manual carefully and become
acquainted with all adjustments and operating procedures before attempting to operate the equipment.
Replacement manuals can be obtained from your selling dealer or the manufacturer.
The equipment you have purchased has been carefully engineered and manufactured to provide
dependable and satisfactory use. Like all mechanical products, it will require cleaning and upkeep. Lubricate
and clean the unit as specified. Please observe all safety information in this manual and the safety decals on
the equipment.
THIS MACHINE IS DESIGNED FOR SHARPENING REEL TYPE MOWER BLADES ONLY. ANY USE OTHER
THAN THIS MAY CAUSE PERSONAL INJURY AND VOID THE WARRANTY.
TO ASSURE THE QUALITY AND SAFETY OF YOUR MACHINE AND TO MAINTAIN THE WARRANTY, YOU
MUST USE ORIGINAL EQUIPMENT MANUFACTURER'S REPLACEMENT PARTS AND HAVE ANY REPAIR
WORK DONE BY A QUALIFIED PROFESSIONAL.
ALL OPERATORS OF THIS EQUIPMENT MUST BE THOROUGHLY TRAINED BEFORE OPERATING
THE EQUIPMENT.
DO NOT USE COMPRESSED AIR TO CLEAN GRINDING DUST FROM THE MACHINE. THIS DUST CAN
CAUSE PERSONAL INJURY AS WELL AS DAMAGE TO THE GRINDER.
PREPARATION/INSTALLATION CHECK LIST
BEFORE USING THIS EQUIPMENT REFER TO THE LIST BELOW. VERIFY THAT ALL OF THE LISTED ITEMS
ARE COMPLETED BEFORE POWERING UP THE EQUIPMENT:
‰ Equipment is completely assembled.
‰ All shields are in place and in good condition.
‰ All decals are in place and readable.
‰ Overall condition is good (i.e. paint, welds, and electrical).
‰ Verify there is sufficient electrical power to operate the machine.
‰ Read and understand all areas of the Operator's Manual, and review the Service Manual, and any
additional training material if available.
‰ Understand the placement of the cutting unit and positioning of the grinding carriage to the cutting unit.
‰ Understand the use of the relief mechanism.
‰ Understand travel limit sensor positioning.
‰ Understand use of the reel positioning gauge.
‰ Understand spin speed vs. quality.
‰ Understand general maintenance.
5
Advertisement
Table of Contents
