Foley United 633 Operator's Manual page 17

GETTING TO KNOW YOUR GRINDER
3. TRAVERSE SPEED KNOB
1. EMERGENCY STOP BUTTON OR E-STOP
1. EMERGENCY STOP BUTTON or E-STOP
Push to remove all power to motor. To restore power, pull up out and press the START/RESET SWITCH.
2. START/RESET BUTTON
Resets the control which allow the operator to control motors.
3. TRAVERSE SPEED KNOB
Increases or decreases the speed of the grinding head traversing left and right, measured in feet per
second (ft/s).
4. POWER SWITCH AND FUSES (RIGHT SIDE OF MACHINE).
Turns OFF and ON the control and related components. Disconnect the cord at the wall outlet before
performing service. FUSES - Interrupts excessive current (blows) so that further damage by overheating or
fire is prevented.
THIS IS NOT A MAIN DISCONNECT!
5. TORQUE SPEED KNOB
Increases or decreases the torque required to index the reel during the RELIEF GRIND cycle.
6. SPIN SPEED KNOB
Increases or decreases the spin speed during the SPIN GRIND cycle.
CONTROLS
17
ORIGINAL INSTRUCTIONS
4. POWER SWITCH/FUSES
6. SPIN SPEED
KNOB
5. TORQUE
SPEED KNOB
2. START/RESET BUTTON