Foley United 633 Operator's Manual page 24

OPERATION
STEP 2: POSITION THE GRINDING HEAD CARRIAGE
Before you align the GRINDING HEAD CARRIAGE to the reel of the cutting unit, true the GRINDING HEAD
CARRIAGE parallel to the ACCU-REEL POSITIONER V-BLOCKS SUPPORT by adjusting the CROSS SLIDE
ASSEMBLY. Unlock the ORANGE LOCK HANDLE on the CROSS SLIDE ASSEMBLY and rotate the ORANGE
HANDWHEEL until the DIAL INDICATOR on the CROSS SLIDE ASSEMBLY reads "0" with the long hand and
"3" with the short hand (see FIG 15).
ORANGE HANDWHEEL
LONG HAND
SHORT HAND
FIG. 15
ORANGE LOCK HANDLE
DIAL INDICATOR IN FACTORY "0" POSITION
DIAL INDICATOR
24
ORIGINAL INSTRUCTIONS
FIG. 16