Table of Contents
Advertisement
SAFETY INSTRUCTIONS
READ AND UNDERSTAND AND LOCATE ALL DECALS ON THIS MACHINE BEFORE OPERATING
THIS EQUIPMENT.
1
Keep visitors at a safe distance away from
the equipment.
2
Read Service manual and disconnect
power before servicing.
3
Refer to manual– after installation,
read the user's guide carefully before
operating. Follow all operating and other
instructions carefully.
4
WARNING! Use of proper eyewear
is mandatory when operating this
equipment.
5
WARNING! Gloves or other hand
protection is required when operating this
equipment.
6
WARNING! Operators and people in close
proximity must wear respirators or have
adequate ventilation systems.
7
WARNING! Hearing protection required
when operating this equipment.
This is the electrical hazard symbol. It
8
indicates that there are DANGEROUS
HIGH VOLTAGES PRESENT inside the
enclosure of this product. TO REDUCE
THE RISK OF FIRE OR ELECTRIC SHOCK,
do not attempt to open the enclosure or
gain access to areas where you are not
9
instructed to do so. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
Entanglement Hazard. Keep clear of belt.
10
Sharp object in the vicinity which may
cause injury. Keep hands clear of sharp
edges!
11
Power cord may be a trip hazard. Secure
the power cord in a manner that removes
it as a trip hazard.
12
Use a Fork Lift with a minimum of
48" [122cm] long forks to move this
Equipment. Lift only where indicated on
the machine. Failure to use proper lifting
equipment may result in personal injury or
damage to the equipment.
13
Unplug the machine when servicing or
storing for an extended period of time.
14
WARNING! Do Not Operate Without
Guards and Covers in Place. There are
moving parts located behind the guards.
15
WARNING! Keep exposed gasoline or
flammables away from the grinder
because it operates with a large amount
of sparks.
16
Shows the minimum speed [3600 RPM]
that the grinding wheel must be rated for
3600
to use on this equipment.
MIN
17
POWER CORD PROTECTION – The power
supply cord for this product acts as the
main-disconnect. It should be routed or
installed in such a manner to protect it
from being walked on or pinched. The
unit should be powered down completely
before connecting or disconnecting the
power cable. The power cord should be
removed before moving the unit. The
power cord must be placed near an easily
accessible unobstructed socket outlet.
18
WINCH AND BOOM CAPACITY IS A MAXIMUM OF 180Kg
OR 400 LBS. Exceeding the capacity may result in personal
injury or damage to the equipment.
19
VACUUM - Do not block or plug vacuum
bypass hole. Empty vacuum weekly as per
daily maintenance to prevent overheating
or fire.
11
ORIGINAL INSTRUCTIONS
Advertisement
Table of Contents
