Cutting Unit - Foley United 633 Operator's Manual

OPERATION
All new machines come equipped with 8-9-11 spline
adapters (part # 3706130) (See FIG. 27). Use one of
these adapters to connect the SPIN DRIVE MOTOR to
the cutting unit (see FIG. 28). If you need a different
adapter, contact the reel manufacturer.
CONNECT SPIN DRIVE
SPIN MOTOR SWITCH
FIG. 27
Choose which side of the reel you want to spin from
and install the SPIN DRIVE MOTOR with the correct
adapter. This will generally be the same drive system
component used for backlapping see FIG. 28.
The SPIN DRIVE MOTOR attaches to the end of the
reel shaft or a drive system component. Consult
the cutting unit manufacturer for proper spin drive
placement and attachment.
NOTE: Ensure spin rotation is the same as the grinding
wheel - clockwise looking from right end.
SPIN MOTOR DIRECTION SWITCH
SPIN/TORQUE SELECTOR SWITCH
CUTTING
UNIT
SPIN MOTOR
LOCK HANDLE
29
ORIGINAL INSTRUCTIONS
DRIVE
ADAPTER
FIG. 28
TENSION ADJUSTERS
LIFT STRAIGHT UP
PIN