Table of Contents
Advertisement
OPERATION
CORRESPONDING ANGLE
FIG. 32
RELIEF ANGLE ADJUSTMENT
To adjust the RELIEF ANGLE ADJUSTER, turn the knob clockwise for more clearance or counter-clockwise for
less clearance until you have reached the desired angle which corresponds with the decal on the ACCU-REEL
POSITIONER (see FIG. 32).
NOTE: This is a starting point that will set the relief angle close to factory specifications. If you desire more or
less relief, simply adjust the angle.
Use ADJUSTER KNOB
to set RELIEF ANGLE.
FIXED FINGER
LOCK HANDLE
Adjust the RELIEF FIXED FINGER so there is a small
gap between the FIXED FINGER and the wheel (about
1/32" 1/16" [1-1.5 mm].
FIG. 33
34
ORIGINAL INSTRUCTIONS
INDEX STOP
KNOB
Advertisement
Table of Contents
