Installation For Dos; Using "Install.exe" Utility To Install Penmount Software Driver; Identify The Communication Port And Irq Number - Advantech FPM-3150 Series User Manual

A.3.3 Installation for DOS
A.3.3.1 Using "INSTALL.EXE" utility to
install PenMount software driver.
A.Insert the drive diskette to floppy disk drive.
B. Type "INSTALL" (e.g.,A:\INSTALL).
C. A pop-up window will display "Salt International Corp. PenMount
Install Utilities. Press ENTER key to allow PenMount install the
drivers to drive C or use keyboard to key-in the hard disk drive that
you plan to install the driver." Press ENTER.
D.The pop-up window will ask "Do you want to modify your
Autoexec.bat to initilaize PenMount? (Y/N)" Choose "Y" to generate
the initializing instruction in the autoexec.bat files.
A.3.3.2 Identify the communication port
and IRQ number
A.For first time installation, or to change PenMount Touch Screen's
COM port, use PMDETECT (e.g. C:\PENMOUNT\PMDETECT)) to
check the COM port and IRQ number automatically. The screen will
then show:
PenMount is initialized successfully!!!
Create file "pmouse.cfg". Success.
PenMount internal settings:
Comm. Port: COM<n> IRQ<n>
..........
B. PMDETECT program is able to skip IRQ detecting if you do not
need to detect a specified IRQ number. For example, if you do not need
to detect IRQ5, the command is :
C:\PENMOUNT\PMDETECT -N5
20 FPM-3150 User's Manual