Specifications - Powercom 325A User Manual

11. Storage
__________________________________________________________
____
10.1 Storage conditions
Store the UPS covered and upright in a cool , dry location, with its battery fully
charged. Before storing, charger the UPS for at least 4 hours. Remove any
accessories in the accessory slot and disconnect any cables connected to the
computer interface port to avoid unnecessary draining the battery.
10.2 Extended storage
During extended storage in environments where the ambient temperature is -15
to +30 ℃ (+5 to +86 ℉ ), charge the UPS's battery every 6 months.
During extended storage in environments where the ambient temperature is
+30 to +45 ℃ (+86 to +113 ℉ ), charge the UPS's battery every 3 months.

12. Specifications

__________________________________________________________
____
MODEL
INPUT Capacity
Voltage
Frequency
OUTPUT Voltage
(on battery)
Frequency
(on battery)
Voltage
Regulation
AVR
Transfer Time
PROTECTION Spike Protection
and
FILTERING
EMI/RFI filter
Overload
Protection
Unit Input
10Baase-T
Cable Port
Short Circuit
BATTERY Type
325A 425A(P)
325VA 425VA
100V, 110V, 120V, 220V, 232V, 240V, +/-25%
50 or 60Hz +/-5% (auto sensing)
Simulated sine wave at Line Input +/-5%
50 or 60Hz +/-0.5%
AVR automatically increase output voltage 15% above input
voltage if -9% to-25% of nominal. AVR decrease output voltage
13% below input voltage if+9% to 25% of nominal
2/4 milliseconds, including detection time
320 joules, 2ms
10dB at15MHz, 50dB at 30MHz
(for xxxAP models only)
UPS automatic shutdown if overload exceeds 110% of nominal at
60 second and 130% at 3 seconds.
Fuse for overload & short circuit protection
Network (UTP, RJ-45) compatible jacks
(for xxxAp models only)
UPS output cut off immediately or input fuse protection
Sealed, maintenance-free lead acid
525A(P) 625A(P)
525VA 625VA